Fuji Xerox DocuPrint M355df Service Manual page 192

13 Move the KIT AC INLET (110 / 220) (PL18.2.99) and the harness guide slightly toward you.
14 Remove the four screws (silver, tapping, 8mm) that fix the DRIVE ASSY MAIN, and then remove
the DRIVE ASSY MAIN from the printer.
15 Disengage the connector (P/J101) from the DRIVE ASSY MAIN.
NOTE
Keep the LINK COVER stowed within the printer.
Chapter 4 Disassembly / Assembly and Adjustment
4-18
4.2 Removal / Replacement