Parameter List Print (Print) - Fuji Xerox DocuPrint M355df Service Manual

Chapter 6 General
6.10 Parameter Settings (Parameter)

6.10.3 Parameter List Print (Print)

Prints the parameter values held in the IOT (registration setting values and life counter value).
When you print the parameter list, check that the Tray 1 contains A4 paper. (Only A4 size is supported)
If the parameter list is printed on a sheet of a size other than A4, some part of the image might be lost.
If a paper size other than A4 is set as the default paper size for the tray via [Tray Settings] and [Paper Size],
the printer displays [Processing] on the operator panel and outputs no parameter list.
In that case, turn off the power and then on, set A4 as the default paper size for the tray via [Tray Settings]
and [Paper Size], and then print the parameter list in the CE mode.
Procedure
1 Enter the CE mode. (See "6.4.2 How to Enter the CE Mode".)
2 Confirm that [Printer Diag] is selected, and then press the [OK] button.
3 Use the [ ] button to select [Parameter], and then press the [OK] button.
Printer Diag
Parameter
4 Use the [ ] button to select [Print], and then press the [OK] button.
Parameter
Print
5 Press the [OK] button to print the parameter list.
• The screen returns to [Ready to print] after printing.
Print
Processing
6 Press the [C(Clear)] button to return to the [Printer Diag] screen.
7 Exits the CE mode. (See "6.4.4 How to Exit the CE Mode".)
Printer Diag
Parameter
6-72
Parameter
Regi
Print
Ready to print
Print
Ready to print