Ess Diag; All Test - Fuji Xerox DocuPrint M355df Service Manual

Chapter 6 General

6.5 ESS Diag

6.5 ESS Diag
This section describes the details of the ESS Diag tests.

6.5.1 All Test

Continually performs FlashROM, EEPROM, DRAM, ASIC, and IOT. (MAC+PHY, PANEL, USB Host, and
RTC are not performed.)
Test Result Display
Normal
CHECK OK
Procedure
1 Enter the CE mode. (See "6.4.2 How to Enter the CE Mode".)
2 Confirm that [Printer Diag] is selected, and then press the [OK] button.
3 Confirm that [ESS Diag] is selected, and then press the [OK] button.
Printer Diag
ESS Diag
4 Press the [OK] button.
All Test
Start
5 Press the [OK] button to start the test.
All Test
Processing
6 Press the [C(Clear)] button to return to the [Printer Diag] screen.
7 Exits the CE mode. (See "6.4.4 How to Exit the CE Mode".)
Table 6-30 All Test
Error
***: Displays the name of the test ended in error.
*** Error
(FlashROM / EEPROM / DRAM / ASIC / IOT)
Printer Diag
ESS Diag
Remarks
ESS Diag
All Test
All Test
CHECK OK
6-38