Fip2.8 Regi. Clutch (Pl15.2.4) - Fuji Xerox DocuPrint M355df Service Manual

FIP2.8 REGI. CLUTCH (PL15.2.4)
Step
Parts considered to be the cause
DRIVE ASSY MAIN (PL3.1.1)
REGI. CLUTCH (PL15.2.4)
PWBA MCU (PL18.2.2)
Check for foreign substances in the REGI. CLUTCH Drive
Section
1
Are there any foreign substances in the REGI. CLUTCH
Drive Section?
Check the shape of the DRIVE ASSY MAIN
2
Is the DRIVE ASSY MAIN damaged?
Check connector connection
Check the connection between the REGI. CLUTCH and
3
the PWBA MCU.
Is the REGI. CLUTCH (P/J12) connected securely?
Check after replacing the REGI. CLUTCH
4 Replace the REGI. CLUTCH.
Does an error occur?
Check and Action
2-81
Chapter 2 Troubleshooting
2.3 Error Code FIP
Yes
Remove the
foreign sub-
stances
Replace the
DRIVE ASSY
MAIN
(REP 3.1)
Securely con-
nect the REGI.
Go to Step 4.
Replace the
PWBA MCU.
(REP 18.2)
No
Go to Step 2.
Go to Step 3.
CLUTCH
(P/J12)
End of work.