Fip2.12 Drive Assy Main (Pl3.1.1) - Fuji Xerox DocuPrint M355df Service Manual

FIP2.12 DRIVE ASSY MAIN (PL3.1.1)
Step
Parts considered to be the cause
DRIVE ASSY MAIN (PL3.1.1)
HARNESS ASSY MAIN MOT (PL18.3.11)
PWB LVPS (PL18.1.5)
PWBA MCU (PL18.2.2)
Check for foreign substances in the DRIVE ASSY MAIN
Drive Section
1
Are there any foreign substances in the DRIVE ASSY
MAIN Drive Section?
Check the shape of the DRIVE ASSY MAIN
2
Is the DRIVE ASSY MAIN damaged?
Check connector connection
Check the connections between the DRIVE ASSY MAIN
and the PWBA MCU, as well as between the DRIVE
3
ASSY MAIN and the PWB LVPS.
Is the HARNESS ASSY MAIN MOT (P/J101-P/J10P/
J101-P/J212) connected securely?
Check after replacing the DRIVE ASSY MAIN
4 Replace the DRIVE ASSY MAIN. (REP 3.1)
Does an error occur?
Check after replacing the HARNESS ASSY MAIN MOT
5 Replace the HARNESS ASSY MAIN MOT.
Does an error occur?
Check after replacing the PWB LVPS
6 Replace the PWB LVPS. (REP 18.4)
Does an error occur?
Check and Action
2-85
Chapter 2 Troubleshooting
2.3 Error Code FIP
Yes
Remove the
foreign sub- Go to Step 2.
stances
Replace the
DRIVE ASSY
Go to Step 3.
MAIN
(REP 3.1)
Securely con-
nect the HAR-
NESS ASSY
Go to Step 4.
MAIN MOT (P/
J101-P/J10P/
J101-P/J212)
Go to Step 5. End of work.
Go to Step 6. End of work.
Replace the
PWBA MCU. End of work.
(REP 18.2)
No