Fuji Xerox DocuPrint M355df Service Manual page 169

Chapter 3 Image Quality Troubleshooting
3.2 Image Quality Troubleshooting
Step
12 Is the image printed correctly?
Check the paper feed rolls
Are the paper feed rolls (the rolls that are listed among the
13
parts considered to be the cause in sequence) deformed or
worn out?
14 Is the image printed correctly?
Checking after resetting the Paper Cassette.
15 Reseat the Paper Cassette.
Is the image printed correctly?
Checking the side guides of the Paper Cassette.
16 Reset the side guide.
Is the image printed correctly?
Checking after resetting the Transfer Unit.
17 Reseat the Transfer Unit.
Is the image printed correctly?
Checking after resetting the FUSING UNIT.
Reseat the FUSING UNIT.
Is the image printed correctly?
18
Start the operation after the FUSING UNIT has cooled
down.
Checking after replacing the FUSING UNIT.
Replace the FUSING UNIT.
Is the image printed correctly?
Start the operation after the FUSING UNIT has cooled
19
down.
NOTE
After replacement, be sure to clear the life counter value.
Check and Action
3-40
Yes
End of work. Go to step 13.
Replace the cor-
responding
paper feed rolls, Go to Step 15.
then go to step
14.
End of work. Go to step15.
End of work. Go to step 16.
End of work. Go to step 17.
End of work. Go to step 18.
End of work. Go to step 19.
Replace the
End of work.
printer.
No