Nvm Loading (Load Nvm From Ess) - Fuji Xerox DocuPrint M355df Service Manual

6.6.3.3 NVM Loading (Load NVM from ESS)

Loads the information saved in the ESS NVM to the IOT NVM.
NOTE
If [Save NVM to ESS] has never been executed, [Load NVM from ESS] is not displayed.
Procedure
1 Enter the CE mode. (See "6.4.2 How to Enter the CE Mode".)
2 Confirm that [Printer Diag] is selected, and then press the [OK] button.
3 Use the [ ] button to select [IOT Diag], and then press the [OK] button.
Printer Diag
IOT Diag
4 Use the [ ] button to select [NVM Settings], and then press the [OK] button.
IOT Diag
NVM Settings
5 Use the [ ] button to select [Load NVM from ESS], and then press the [OK] button.
NVM Settings
Load NVM from ESS
6 Press the [OK] button.
Load NVM from ESS
Processing
7 Press the [C(Clear)] to return to the [Printer Diag] screen, and then exit the CE mode.
(See "6.4.4 How to Exit the CE Mode".)
IOT Diag
Digital Input
NVM Settings
Edit NVM
Load NVM from ESS
Load NVM from ESS
Loaded
6-53
Chapter 6 General
6.6 IOT Diag
OK?