Table of Contents
Advertisement
Chapter 6 General
6.8 Installation Settings (Installation)
6.8 Installation Settings (Installation)
Set the following parameters.
Item
Serial No.
HexDump
Tone Correction (IOT tone control)
Pixel Counter
Dip Switch 0
Dip Switch 1
Configuration
Dip Switch 2
Dip Switch 3
Meter Type
B/W
(B/W print counter)
Print Counter
B/W Backup
(Print Service)
(Backup B/W print counter)
B/W Error
(B/W print error counter)
B/W
B/W copy counter
B/W Backup
Print Counter
Backup B/W copy counter
(Copy Service)
B/W Error
B/W copy error counter
Table 6-42 Installation Settings
Range
Displays or changes a six-digit serial number
6 digits
(numbers of 0 through 9 and upper case
alphabets of A through Z).
Displays or changes whether to enable Hex-
OFF/ON
Dump.
Displays or changes whether to enable the
OFF/ON
IOT tone correction.
Displays the pixel count of the last page.
• Displays the ESS-ASIC based pixel count of
-
• The value is rounded off to the first decimal
8 digits
8 digits
Displays or changes the dip switch values on
the NVM of the ESS (0/1 for each digit).
8 digits
8 digits
Type1/
Displays or changes the Meter Type informa-
Type2
tion currently set.
Displays the current value of the following
counters.
• B/W print count in the normal mode
-
• B/W print count in the toner saver mode
• Report print count
Displays the backup value of the B/W print
-
counter.
Displays the number of auto-recoveries per-
formed when the value of the B/W print
-
counter is different from that of the Backup B/
W print counter.
-
Displays the value of the B/W copy counter.
Displays the backup value of the B/W copy
-
counter.
Displays the number of auto-recoveries per-
formed when the value of the B/W copy
-
counter is different from that of the Backup B/
W copy counter.
6-60
Description
the last page printed, as a coverage ratio
with respect to the area 4 mm inside all
sides of A4.
place.
Advertisement
Chapters
Table of Contents
Troubleshooting
