Fuji Xerox DocuPrint M355df Service Manual page 68

Status
LCD Message
Code
Env Sensor Error
092-661 092-661
Restart Printer
%s
Replace Toner Car-
093-426
tridge Soon
Life Almost Over
Low Toner Density
Remove Toner,
093-922
Shake Cartridge
and Reinstall
Toner CRUM Error
093-925
093-925
Reseat or Replace
Toner Cartridge
Invalid Toner Cartridge
093-926 Reseat Toner Car-
tridge
Toner Type Error
093-928
093-928
Reseat or Replace
Toner Cartridge
Out of Toner
093-933 Replace
Toner Cartridge
Toner Cartridge
Detached
093-973
093-973
Insert Toner Cartridge
USB Host Error
116-210 116-210
Restart Printer
MAC Address Error
116-314 116-314
Restart Printer
RAM Error
116-315 116-315
Restart Printer
RAM Error
116-316 116-316
Restart Printer
Name/Description of Error
<IOT Environment Sensor Error>
The Temp. Sensor or the Humi. Sensor error was
detected.
<Toner Near Life>
It was detected that the Toner Cartridge needed to
be replaced soon.
<Toner Low Density>
Low concentration of the Toner was detected.
<Toner CRUM Error>
The Toner CRUM error was detected.
<Toner CRUM ID Error>
The Toner CRUM ID error was detected.
<Toner Type Error>
The Toner Type Error was detected.
<Toner Life Over>
It was detected that the Toner Cartridge needed to
be replaced soon.
<Toner Detached>
It was detected that the Toner CRUM is not at the
specified position.
(Loose CRUM)
<USB Host Error>
Fatal error of USB Host driver.
<MAC Address Error>
On Board Network MAC Address Checksum Error.
<ESS On Board RAM W/R Check Fail>
Detected by On Board RAM W/R Check at the time
of initialization.
<ESS DIMM Slot RAM W/R Check Fail>
Detected by DIMM Slot RAM W/R Check at the time
of initialization.
2-35
Chapter 2 Troubleshooting
2.2 Status Code List
FIP1.10
Replace the
TONER CAR-
TRIDGE
(PL8.1.2)
FIP1.25
FIP1.26
FIP1.26
FIP1.26
Replace the
TONER CAR-
TRIDGE
(PL8.1.2)
FIP1.26
Replace the
PWBA ESS.
(REP18.1)
Replace the
PWBA ESS.
(REP18.1)
If the problem
cannot be
solved, replace
the printer.
Replace the
PWBA ESS.
(REP18.1)
FIP1.27
FIP