Fuji Xerox DocuPrint M355df Service Manual page 412

Table 6-29 Function Names and Descriptions (Fax/Scanner)
White Balance
Shading Parameter
Registration Param.
Auto Registration
Sensor Parameter
Scanner
Vertical Scan Mag.
Mainte-
nance
Test Pattern
IIT I/O Check
Scan Counter Clear
Carriage Drive_100
Parameter
All Clear
User Clear
System Clear
Backup
User&System Clear
Data
System Data Init
Document Clear
Complete Complete
Function
Adjusts the white balance automatically.
Adjusts the shading factor setting.
Adjusts registration.
Sets whether to enable the Auto Registration
feature.
Adjusts the power control value of the Feed
Sensor.
Sets the parameters of the magnification for the
slow scanning direction.
Sets the test pattern and parameters.
Checks the input/output of the scanner compo-
nents.
Clears the scan counter.
Operates the carriage 100 times consecutively,
as an IIT jig for the ORT. If an error is detected,
[Abnormal End] is displayed. Errors can be
detected for [Lamp Error] and [Home Position
Error] only.
Sets the system data using ChainLink.
Deletes the backup data in SRAM/EEPROM.
Deletes the backup data in SRAM/EEPROM.
Deletes the backup data in SRAM/EEPROM.
Deletes the backup data in SRAM/EEPROM.
Deletes the backup data in SRAM/EEPROM.
Deletes the document data in the Flash Memory
for Fax.
Exits the CE mode and restarts the printer.
6-37
Chapter 6 General
6.4 Service Mode
Description See
6.13.1
6.13.2
6.13.3
6.13.4
6.13.5
6.13.6
6.13.7
6.13.8
6.13.9
6.13.10
6.14
6.15
6.4.4