Fip1.21 077-304 Iot Cover Rear Open - Fuji Xerox DocuPrint M355df Service Manual

FIP1.21 077-304 IOT Cover Rear Open
Step
Parts considered to be the cause
KIT COVER ASSY REAR (PL19.1.99)
Rear Interlock Switch [HARNESS ASSY INTLK]
(PL15.1.4)
HARNESS ASSY LV (PL18.3.5)
PWB LVPS (PL18.1.5)
PWBA MCU (PL18.2.2)
Check the shape of the protruding portion of the KIT
COVER ASSY REAR
1
Is the protruding portion of the KIT COVER ASSY REAR
damaged?
Check the Rear Interlock Switch operation
Execute the Diag Digital Output [041-301] to check the
2
operation of the Rear Interlock Switch.
Is it working properly?
Check connector connection
Check the connection between the Rear Interlock Switch
and the LVPS, as well as between the PWB LVPS and the
3
PWBA MCU.
Are the Rear Interlock Switch (P/J230) and the HARNESS
ASSY LV (P/J220-P/J22) connected securely?
Check after replacing the Rear Interlock Switch
4 Replace the Rear Interlock Switch.
Does an error occur?
Check after replacing the HARNESS ASSY LV
5 Replace the HARNESS ASSY LV.
Does an error occur?
Check after replacing the PWB LVPS
6 Replace the PWB LVPS. (REP 18.4)
Does an error occur?
Check and Action
2-67
Chapter 2 Troubleshooting
2.3 Error Code FIP
Yes
Replace the
KIT COVER
Go to Step 2.
ASSY REAR
(REP 19.7)
Replace the
PWBA MCU. Go to Step 3.
(REP 18.2)
Securely con-
nect the Rear
Interlock Switch
Go to Step 4. (P/J230) and
the HARNESS
(P/J220-P/J22)
Go to Step 5. End of work.
Go to Step 6. End of work.
Replace the
PWBA MCU. End of work.
(REP 18.2)
No
ASSY LV