Fuji Xerox DocuPrint M355df Service Manual page 148

Table of Contents

Advertisement

Step
Checking the Drum Cartridge for connection.
Remove the Drum Cartridge.
9
Are the Spring BCR and Spring DB on HVPS dirty or
deformed?
Checking after resetting the Drum Cartridge.
10
Reseat the Drum Cartridge.
Is the image printed correctly?
Checking after replacing the Drum Cartridge.
11
Replace the Drum Cartridge.
Is the image printed correctly?
Checking after replacing the FUSING UNIT.
Replacing the FUSING UNIT.
Is the image printed correctly?
Start the operation after the FUSING UNIT has cooled
12
down.
NOTE
After replacement, be sure to clear the life counter value.
Chapter 3 Image Quality Troubleshooting
Check and Action
3-19
3.2 Image Quality Troubleshooting
Yes
Clean up the
Spring BCR and
Spring DB or
Replace the
HVPS (REP
18.3), then go to
step 10.
End of work.
End of work.
End of work.
No
Go to step 10.
Go to step 11.
Go to step 12.
Replace the
HVPS. (REP
18.3)

Advertisement

Table of Contents
loading

Table of Contents