The Top Margin Is Incorrect; Protrudent/Bumpy Paper - Fuji Xerox DocuPrint M255 z User Manual

The Top Margin Is Incorrect

Problem
The top margin is incorrect.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Protrudent/Bumpy Paper

Problem
Printed surface got
protrudent/bumpy.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.
370 Troubleshooting
Action
Ensure that the margins are set correctly on the application being
used.
Action
Clean up the fusing unit.
1 Load one sheet of paper in the paper tray, and then print a solid
image all over paper.
2 Load the printed sheet with the print surface facing down, and then
print a blank sheet of paper.