Collection Of Host Information On Business Server - RAID Xanadu User Manual

9. Collection of Host Information on Business
Server
This chapter describes the collection of host information from a business server.
Collection of the host information on a business server obtains WWPN information from the host
bus adapter (HBA) installed in the business server.
If business servers use only Windows OS and the system is an entirely new installation, automatic
collection of host information can be done. If you are setting up a disk array in a system that has
already been in operation, or if a business server contains a Linux OS, collect host information
using the methods shown in 9.1 and 9.2.
(1) Configuration for which automatic collection of host information is possible
This method can be used if all business server OS of a new installation connected by Fibre
Channel cable are Windows and the disk array unit is also newly installed. Perform
setup using the Storage Manager initialization wizard. (Refer to (5) "Host
information collection method selection" in 11.1.2.)
New disk array New Windows server
SAN
New Windows server
- -
69