RAID Xanadu User Manual page 148

(2) PathManager setup and status confirmation
If you have not installed PathManager, this task is unnecessary.
After confirming that an FC cable is connected between the server and RAID Storage, restart the
server and perform the checks below from the command prompt.
Refer to the "PathManager User's Manual (Linux)" or the "PathManager for Linux Installation
Guide" for details.
1. Confirmation of kernel version
Confirm that PathManager supported by the kernel being used is installed.
Confirm that kernel version (A) displayed by "uname -r" and kernel version (B) displayed
by "rpm -qi" are the same.
# uname -r
2.4.X-XX
# rpm -qa | grep sps
sps-xxx-yyyy
# rpm -qi sps-xxx-yyyy
Name : sps-X-XXX Relocations: (not relocateable)
Version : 2.X.X Vendor: RAID Inc.
Release : 2.X.XX.XX Build Date: 200y MM DD hh mm ss
Install date: 200y MM DD hh mm ss Build Host: RAID.co.jp
Group : Utilities/System Source RPM: sps-X-XX.X.src.rpm
Size : XXXXXX License: commercial
Summary : SCSI dual-path driver and utilities for RAID Storage
Description :
This package contains a driver, daemon and some utilities. The
driver (dd_mod,dd) provides the redundant SCSI-path for
RAID Storage Disk Array System.
The daemon (dd_daemon) supervises the driver.
And, some utilities work for the maintenance.
It runs on 2.4.X.XX kernel.
Figure 13.2.2 Confirmation of Kernel Version
* This may differ somewhat if the OS is a 2.6 series kernel.
Kernel version (A)
Kernel version (B) in which
PathManager is supported
- -
125