Installing And Removing Front Panel - RAID Xanadu User Manual

4.4

Installing and Removing Front Panel

State of mask key
The left figure shows the key unlocked when the key is in a horizontal state.
The right figure shows the key locked when the key is in a vertical state.
Shows key in unlocked state.
[Front panel installation procedure]
(1) To install the mask, first unlock it by turning the key to the horizontal position.
(2) Mate the mask to the top and bottom, left and right of the unit and push it straight in until it
clicks.
* If it clicks, it has been installed accurately.
(3) After installing the mask, lock it by turning the key counterclockwise and mask installation is
complete.
Shows key in locked state.
- -
33