RAID Xanadu User Manual page 124

When no host name is displayed after executing [Update with info from the iSM
server], refer to the following and take appropriate action.
16 "Troubleshooting"
16.3 "Troubleshooting in Initialization Wizard/Easy Configuration"
Condition: In an environment in which a Windows OS is used in the business
server, [Automatic collection] was specified in the host information
collection method specification screen of the initialization wizard, but
the host is not displayed in [Selection host] of the logical disk binding
screen.
LDset Name
Use this to set and name a grouping of logical disks (LD Set) accessible to the specified
host. The default value of the LD Set name is the name of the assigned host.
To edit the LD Set name, check the checkbox displayed ahead of [LDset Name].
Name
To specify an arbitrary name for the logical disk, check the checkbox and change the name.
A four-digit logical disk number is added to the specified name.
Quick Format
By performing only the minimum necessary processing and omitting data area initialization
(clearing), this formats in a short time.
This is available only for RAID types and platforms supported by quick formatting in a
basic pool.
RAID Storage provides basic pools and dynamic pools. Refer to the "Configuration Setting
Tool User's Manual (GUI)" for details.
GPT Disk Type
Specify this when using the logical disk to bind in a Windows partition format GUID
partition table (GPT).
Spare Binding
Use this to automatically bind a spare physical disk that has the same PD type as that
selected in [RAID Type/PDP Type (capacity)]. This does not bind a spare disk if there is no
physical disk of the same PD type to bind to a physical disk as a spare.
Clicking the [Next] button executes license unlocking and logical disk binding.
- -
101