8.2
Installation of Volume List Command
If ControlCommand has been installed as in 8.3, this task is unnecessary.
8.2.1
Prior to Setup
Before beginning volume list command (iSMvollist command) installation, be sure of the
following.
By installing the volume list command, the functions of the host information collection
command (iSMcc_hostinfo) becomes available.
Refer to the "Storage Manager Installation Guide" for details about OS environments in which
the host information collection command (iSMcc_hostinfo) and iSM Host Agent Service can be
used.
8.2.2
Installation
Install the volume list command by following the procedure below.
Refer to the "Storage Manager Installation Guide" for details. You will find the manual on the
Storage Manager CD.
(1) Login with root authority or switch to root authority.
(2) Confirm that none of the following software is installed.
iSMrpl (ReplicationControl)
iSMrcd (ReplicationControl/DisasterRecovery)
iSMsc (SnapControl)
iSMvol (Storage Manager volume list command)
iSMccs (ControlCommandSet or ControlCommand)
rpm -q iSMrpl
rpm -q iSMrcd
rpm -q iSMsc
rpm -q iSMvol
rpm -q iSMccs
If any of these are installed, uninstall them.
(3) Insert the CD on the business server.
For servers on which the CD cannot be used, file transfer iSMvol.rpm from another server.
(4) Mount the CD.
Create the mount directory (For example, /cdrom)
Mount using the mount command
mount -r /dev/cdrom
/cdrom
-
-
65