Installation; Mounting Disk Array Unit And Disk Enclosures On Rack - RAID Xanadu User Manual

4. Installation

4.1

Mounting Disk Array Unit and Disk Enclosures on Rack

This section describes how to mount the disk array unit and disk enclosures on a rack.
Follow the instructions in the "Disk Array Unit Setup Guide".
The disk array unit weighs up to 31 kg and a disk enclosure up to 29 kg. At
least three people should perform the tasks of mounting the units on a rack.
Mount disk enclosures, disk array unit, and extended BBU in that order from
the top.
If adding an extended BBU, reserve space to mount the extended BBU (1 unit)
below the disk array unit.
How to attach the rack mount kit that is shipped with the disk array unit to a rack is described
below.
Rack mount kit parts list
No. Part Name
1 Rail (L)
2 Rail (R)
3 M5 screw
4 Cable clamp
5 Releasable tie
Rail (L)
Front
M5 screw
Qty.
1
1
12
4
5
Rear
Rail (R)
Cable clamp
- -
24
Inner
Releasable tie