RAID Xanadu User Manual page 60

(a) Slowly insert the enclosure from the front of the rack.
(b) Affix the enclosure to the attached cage nuts on the left and right using two mounting screws.
(c) From the rear of the rack, insert a rear rail in the gutters along the side of the enclosure and
slide it forward
(d) Affix the rear rail to the rack using two mounting screws.
Also affix a rear rail on the right side of the enclosure by the same method.
Cage nut
(4) Mounting battery units
Return battery units to the enclosure and fasten them with set screws (2 per extended BBU)
and rack mounting of the extended BBU is complete.
Cage nut
Gutter
Affix using mounting screws (Total
of 4 places on left and right)
- -
37
Affix using mounting screws (2
locations, left and right)
Rear rail