16.3
Troubleshooting in Initialization Wizard/Easy Configuration
When trouble is detected, treat it by selecting the conditions below
Condition
A disk array was not found
by the initialization wizard
Initialization cannot be
executed after initialization
aborted, disk array setup
failed, or initialization was
canceled
Initialization was
executed by mistake
Resolve the problem by referring to (2) "Disk array specification" in
11.1.2 "Initialization".
If it still cannot be found, contact your maintenance service agent.
Execute initialization again.
If the disk array cannot be found, make initial settings individually
by referring to 16.3.1 "Changing Network Settings for Monitoring
Disk Arrays from Storage Manager".
If initialization still cannot be executed, contact your maintenance
service agent.
If network settings were changed, refer to 16.3.1 (1) "Changing
Network Settings from Storage Manager" to change the network
settings of the disk array.
If the specification of the host information collection method, port
connection setting, or logical disk binding was changed, refer to 11.2
"Setup Modification" to change each setting of the disk array.
Contact your maintenance service agent concerning changes to
license unlocking.
-
-
149
Action