RAID Xanadu User Manual page 115

Click the [Execute] button to set the specified value to the disk array.
Clicking the [Cancel] button returns to the network setting screen.
If an IP address, subnet mask, or gateway address has not been set correctly,
monitoring by Storage Manager is not possible.
If error message [05068] is displayed, refer to 16.3.1 "Changing Network
Settings for Monitoring Disk Arrays from Storage Manager".
If the initialization wizard is interrupted after network setup by the [Cancel]
button or due to an abnormality, perform initialization from individual settings.
Refer to 11.2 "Setup Modification" for details.
Figure 11.1.11 Confirmation Dialog
-
92
-