Installation Of Controlcommand; Prior To Setup; Installation - RAID Xanadu User Manual

7.3

Installation of ControlCommand

If ControlCommand has not been purchased, this task is unnecessary.
7.3.1

Prior to Setup

Before beginning ControlCommand installation, be sure of the following.
By installing ControlCommand, functions of the host information collection command
(iSMcc_hostinfo) and iSM Host Agent Service become available.
Refer to the "ControlCommand on Windows Installation Guide" for details about OS
environments in which the host information collection command (iSMcc_hostinfo) and iSM
Host Agent Service can be used.
7.3.2

Installation

Install ControlCommand according to the procedure below.
Refer to the "ControlCommand on Windows Installation Guide" for details.
You will find the manual on ControlCommand on Windows CD.
By installing ControlCommand, the functions below become available.
ReplicationControl
ReplicationControl/DisasterRecovery
SnapControl
ProtectControl
PowerControl
Storage Manager volume list command (iSMvollist)
If any of the software below has already been installed, uninstall all of it before you
install ControlCommand.
If ReplicationControl/DisasterRecovery has been installed, you must uninstall
ReplicationControl/DisasterRecovery before you uninstall
ReplicationControl
ReplicationControl/DisasterRecovery
SnapControl
Storage Manager volume list command *
ControlCommandSet or ControlCommand
* If the Storage Manager volume list command that is installed is Ver5.1 or later and
coincides exactly with the version of ControlCommand, you can install
ControlCommand by overwriting with the Storage Manager volume list command
installed.
* Cannot be used on D1 series or D3 series units
- -
60