RAID Xanadu User Manual page 100

1. If the Storage Manager server is connected without making trusted sites settings
and security level settings for the Web browser, the message below may be
displayed and the connection fail.
Change the settings by following the above procedure and connect again.
Figure 10.2.5 Web Browser Screen (When setup is not performed)
When using the Storage Manager client (Web GUI), set it up to allow ActiveX
controls and plug-ins to run in the Web browser.
This can be set in the [Security] tab of the screen displayed by selecting [Internet
Options] from [Control Panel].
2. When connecting to the Storage Manager server, a "Warning – Security" screen
may be displayed. If so, confirm that the issuer is "RAID Inc." and click the
[Run] button.
3. When connecting to the Storage Manager server, a message showing that a
function of Internet Explorer (or program name of Web browser used) is being
blocked may be displayed in a "Windows Security Alert" screen. If so, release
blocking through the screen in question or release the blocking of "Internet
Explorer" (or program name of Web browser used) in firewall setup beforehand.
4. If use via a proxy server has been specified in setup of the Web browser being
used, connection may fail. In that case, specify a proxy exception in Web
browser setup to make connection to the Storage Manager server not be via the
proxy server.
Note that no change is needed if using the Storage Manager client (Web GUI) on
the same computer as the Storage Manager server.
Make changes by the following procedure.
(1) From [Control Panel], select [Internet Options] and display the local area
network settings screen by clicking on [LAN settings] in the [Connections]
tab.
(2) If [Use a proxy server for your LAN] is not checked, you need not perform
the following. If it is checked, display the proxy settings screen by clicking
on [Advanced].
(3) Add the host name or IP address of the server to connect to [Do not use proxy
for addresses beginning with:].
(4) Check JRE proxy settings by the following procedure.
- JRE 1.4.2
From [Control Panel], select [Java Plug-in] and the [Proxies] tab and look
at whether [Use browser settings] is checked. If it is not checked, add the
host name or IP address of the server to connect to No Proxy Host].
- -
77