Power Supply - RAID Xanadu User Manual

3.2.4

Power Supply

(1) Receptacle
(6) Power cable clamp
(1) Receptacle
Connect the power cable that comes with the disk array unit to the receptacle to supply AC
power.
(2) POWER GOOD LED (green)
The LED illuminates to indicate that AC power is being supplied to the unit.
(3) POWER FAULT LED (orange)
The POWER FAULT LED illuminates to indicate that the power supply (excluding the fan)
is faulted.
(4) FAN FAULT LED (orange)
The FAN FAULT LED illuminates to indicate that the fan is faulted.
(5) Ejector
The ejector is used in installing or removing the power supply.
(6) Power cable clamp
The power cable clamp is a mechanism for preventing the power cable from being
disconnected unintentionally.
(5) Ejector
(2) POWER GOOD LED
(3) POWER FAULT LED
- -
19
(4) FAN FAULT LED