Storage Manager Server Environment Setup - RAID Xanadu User Manual

Table of Contents

8.1.2

Storage Manager Server Environment Setup

In order to start the Storage Manager server, environment setup is needed.

The Storage Manager server is supplied with a sample environment definition file

(/etc/iSMsvr/iSMsvr.conf) for each character code. A sample file for the minimum possible

environment setup for the D series (iSMsvr.easy-D.sample) is shown in the references here. Refer to

the "Storage Manager Installation Guide" for other sample files. Explanations of each parameter are

also given in comments in the sample files.

(1) Copy iSMsvr.easy-D.sample to create an environment definition file.

# cp iSMsvr.easy-D.sample iSMsvr.conf

(2) Edit the copied iSMsvr.conf and make the following settings.

(a) Disk array IP settings

When using the initialization wizard to perform initialization, disk array IP settings are not

needed.

(b) Set the user to specify when connecting from the Storage Manager client

When using the initialization wizard to perform initialization, the user settings for a system

administrator (L3) are needed.

login1 = (iSM

login2 = (username, password , L3)

Remove the commenting out (#) of the line above and input the login2 user name and

password. An L3 user is at the user level of a system administrator to whom all operations are

available. The password value can be encrypted.

web_port_no = 8070

If the default port number above conflicts with another application, remove the commenting

out (#) of the above line and change the port number.

(d) Setting of operation log file

file_directory = /opt/iSMsvr/etc/log/

To change the directory storing the operation log from the above default value, remove the

commenting out (#) of the above line and change the path.

, iSM

, L1)

Table of Contents