Table of Contents
Advertisement
4.
Confirm the locations of the respective connectors of the controller and the expansion port
rear surface. (Red rectangles in figures below)
Controller
Guard panel
Expansion port
5.
Remove the guard panel on the front view of the controller (blue rectangle in figure
above).
Next, insert the expansion port by matching the connector locations.
(Insert by matching the expansion port front view panel location to the reference.)
6.
Confirm that it is firmly inserted and there is no play in the expansion port.
Screw in at the two places in the figure above.
-
-
133
Advertisement
Table of Contents
Troubleshooting
