RAID Xanadu User Manual page 84

The version of the software that you install must support disk arrays that are
connected to the server.
Moreover, if a disk array has RemoteDataReplication configured, the remote disk
array to which it connects must also be supported.
If you apply quota management
installation destination, be sure to use it appropriately. When these are used
erroneously, there can be problems during installation or during operation.
*1 This is a facility for setting a limit on used capacity and making it impossible to
use more than the set limit.
*2 This is a facility for making it impossible to save a file of a specific file name
(extension).
After installing ControlCommand, to use it from the Windows task scheduler or from
previously installed job scheduling software, you must restart the system in order for
the path name of the executable file that was installed to be recognized and to start
the installed iSM Host Agent Service.
(1) Login as a user with administrator privileges.
(2) Insert the ControlCommand CD on the business server and execute the following installation
program on the CD drive.
¥iSMCCS¥SETUP.EXE
(3) Follow the instructions of the installer.
*1 *2
or file screening to the disk or folder that is the
- -
61