RAID Xanadu User Manual page 127

(b) For Batch setting with initialize wizard file
If [Batch setting with initialize wizard file] was selected in (4) "Setting method
specification", the screen below is displayed.
Figure 11.1.20 Settings Confirmation Screen
(For Batch setting with initialize wizard file)
Check the settings of each parameter. For settings for each parameter, refer to (c) "Settings
for each parameter".
After confirming the settings, click the [Next] button. This makes the settings for the disk
array.
Clicking the [Cancel] button terminates the initialization wizard. Run the initialization
wizard again.
Clicking the [Back] button returns to the setting method specification screen.
- -
104