Unpacking; Checking Sent Items - RAID Xanadu User Manual

2.3

Unpacking

This is the task of unpacking a delivered disk array unit and removing the materials used to protect
the unit for transportation.
In order to prevent condensation, unpack after sufficiently acclimating the unit to the ambient
temperature following delivery (approximately nine hours).
In unpacking, take the disk array unit itself and the accessories out of the carton in such a way
that they are not exposed to excessive shocks.
The disk array unit is extremely heavy. If only one or two persons lift it when taking it out of
the carton, they may hurt their backs.
At least three people should take the disk array unit out of the carton by supporting the bottom
of the unit and not holding on to projections such as power supplies and controllers.
The carton is designed to transport precision equipment. Do not discard the carton because it
will be needed when returning the unit to the factory for repair.
2.4

Checking Sent Items

When finished unpacking, confirm that all of the items shown in the table below have been sent. If
anything is missing, contact your sales representative.
Next, inspect the unit and the accessories.
If there is any damage, contact your sales representative.
* In order to perform the setup tasks for this disk array unit, at least three disk drives are needed.
If you have not bought disk drives, purchase them before performing the setup tasks.
No.
1 Rack mount kit
2 Front mask
AC cable
3
4 Xanadu microprogram
5 Setup Guide
6 User's Guide
7 User's Guide (CD-R edition)
8 Warranty
9 List of Included Items
Table 2.4.1 List of Included Items for Disk Array
Item Name
-
7
-
Qty.
1
1
1
1
1
1
1
1