RAID Xanadu User Manual page 71

Until the RDY LEDs blink, do not perform any operations using Storage Manager.
If one or more disk enclosures are connected to the disk array unit, always turn on
the AC power of the disk enclosures before turning on the power of the disk array
unit.
Wait until the RDY LEDs start blinking at 1-second intervals before turning on the
power of the business server.
[Power-on procedure]
(1) Push each disk array securely to make sure that it is not loosened.
(2) Turn on the AC power.
(3) The power supply turns
on automatically.
(4) Make sure that the RDY
(5) Turn on the power of the
LEDs blink.
business server.
Figure 5.7.1 Power-on Procedure
- -
48