Notes On Safety - RAID Xanadu User Manual

Before using the disk array unit, carefully read and understand these "Notes on Safety" for safe use
of the unit.
Never use the disk array unit in a location where there is flammable gas or
combustible material. Doing so could cause a fire or explosion.
Do not use the disk array unit in a location that is unusually damp or a location where
water is handled. Doing so could cause failure, electric shock, or fire.
Do not install the disk array unit in a dusty location.
Remove dust adhering to the unit, outlets, and power cord plugs.
Using these with dust on them could cause a fire.
Do not perform any disassembly or rebuilding other than that described in this
manual.
Doing so could cause failure, electric shock, or fire.
Do not install the disk array unit in a location where there is direct sunlight or near a
heater or other object that generates heat.
Doing so could cause failure, fire, or electric shock.
Do not handle the disk array unit with wet hands.
Doing so could cause electric shock.
Do not set up the disk array unit in an unstable location.
If it fell, it could cause failure or injury.
Install the disk array unit so that vent holes are not blocked.
Blocking the vent holes could cause the temperature inside the unit to rise, leading to
failure or fire.
If abnormalities such as smoking or odors occur, turn off the power to the disk array
unit and remove the power plug from the outlet.
Immediately request inspection and repair from your sales or maintenance service
agent.
When moving the disk array unit, do so after removing power cords and cables.
Moving it while these are connected could cause failure, electric shock, or fire.
Do not put your hands into the disk array unit.
If you must put your hands into the unit, do so after turning off the power and
removing power plugs from outlets.
Be careful not to catch or bump your fingers.

Notes on Safety

WARNING
- vi -