RAID Xanadu User Manual page 141

The logical disk is only bound. However, it is not assigned to a specified host
(business server). Assignment to a host can be performed by setting Access
Control in a separate individual setting. Refer to the "Configuration Setting Tool
User's Manual (GUI)" for details.
[Refresh] button
If the name of the host to assign to the logical disk is not displayed in the
Selection host1/Selection host2 specification, click the [Refresh] button. The
following screen is displayed.
Figure 12.4.2 List Update Screen
Select the method of getting host information.
- Update with info from the Storage Manager server
Use this to reacquire host information.
If the host name is not displayed after execution, select [Update with info file].
- Update with info file
Use this to perform host specification using the host information file.
The host information file is the file that is output in 9.1 and 9.2. If there is no
file, output a host information file.
Clicking the [OK] button acquires the specified host information.
Clicking [Close] returns to the logical disk binding screen without performing
any processing.
LDset Name
Use this to set and name a grouping of logical disks (LD Set) accessible to the
specified host. The default value of the LD Set name is the name of the assigned
host.
To edit the LD Set name, check the checkbox displayed ahead of [LDset Name].
Name
To specify an arbitrary name for the logical disk, check the checkbox and change
the name. A four-digit logical disk number is added to the specified name.
- -
118