RAID Xanadu User Manual page 125

Moreover, to bind additional logical disks, select [File] → [Configuration
Setting] → [Easy Configuration] → [LD Bind Easy Configuration] or [File] →
[Configuration Setting] → [Configuration Setting] → [Individual
Setting/Reference] → [LD Bind/Unbind] from the menu bar after the
initialization wizard has ended.
Refer to Chapter 12 "Easy Configuration of RAID Storage" for details of easy
configuration.
Refer to the "Configuration Setting Tool User's Manual (GUI)" for details about
individual setting.
When not binding logical disk using the initialization wizard, disk binding is
performed by Access Control setting of individual setting. Refer to the
"Configuration Setting Tool User's Manual (GUI)" for details about individual
setting.
Specifying the host binds a 0.2 GB control volume besides the logical disk to bind
to the LD Set. (Two control volumes are bound when both Host1 and Host2 are
specified.) Refer to the "Data Replication User's Manual (Function Guide)" and
"Configuration Setting Tool User's Manual (GUI)" regarding control volumes.
Following specification, click the [Next] button.
If you click the [Cancel] button, setup through host connection port setup is performed for the
unit and the initialization wizard cannot be run again. Perform subsequent initialization
including license unlocking by performing Individual Setting from "Configuration Setting".
For details, refer to 11.2 "Setup Modification".
Clicking the [Back] button returns to the logical disk binding specification screen.
- -
102