RAID Xanadu User Manual page 133

(12) Setup completion
The following screen is displayed if the disk array was initialized correctly.
Figure 11.1.21 Setup Completion Screen
Check "Description".
Click the [Save Param...] button to use the settings made in the initialization wizard when
initializing another disk array. The settings made in the initialization wizard (except for IP
address and license information) are saved in text format. The saved file can be used as the file
used for batch setting in (4) "Setting method selection" when initializing another disk array. For
the contents of the file, refer to Appendix B "Initialize Wizard File". To use the saved initialize
wizard file for another disk array, it is necessary to edit the IP address and license key in
advance.
After confirming "Description", click the [Finish] button to terminate the initialization wizard.
This returns you to the Storage Manager main window screen.
If setting modifications and additions do not bind logical disks, perform procedures described
in Chapter 13 "Connection Confirmation from Business Server".
- -
110