RAID Xanadu User Manual page 68

Although the Storage Manager server can be connected to CONT0 or CONT1, connect it on the
CONT0 side if only connecting one. It is recommended that you set IP addresses for the CONT0
and CONT1 LAN ports for Storage Manager use individually to make them redundant and use
them via Ether-HUB.
LAN port for iSM
(LAN connector)
Figure 5.5.2 Rear View of Controller Board
LAN cables used to connect to management server
Use a shielded cross cable to connect a terminal to the unit directly.
Use a shielded straight cable to connect a terminal to the unit via a hub.
CONT1
-
45
CONT0
-
LAN port for iSM
(LAN connector)
LAN port for iSM
(LAN connector)