RAID Xanadu User Manual page 72

[Connection procedure]
Back of disk array unit
Figure 5.7.2 Rear Views of Disk Array Unit and Disk Enclosure
(1) Spread the AC cable clamp, connect the power cable, and loosely lock the clamp.
(2) Move the clamp in the direction of the arrows and fix the clamp securely at a point close to
the base of the plug.
* NOTE
If the clamp is locked loosely, the power cable may come out. Fix the AC cable
clamp securely at a point close to the base of the power cable.
Receptacle
Receptacle
AC cable
Put-on
Spread
Clamp
- -
49
Receptacle
Receptacle