RAID Xanadu User Manual page 118

Figure 11.1.14 Host Connection Port Setup Confirmation Screen
Confirm that the specified values are correct. For an explanation of display contents, refer to
(11) "Settings confirmation".
Upon confirming, click the [Execute] button to set the specified values to the disk array.
If settings was may by mistake, such as setting a data rate that differs from that of
the host bus adapter, it will not be possible to recognize volume from the host
(business server) being connected.
If volumes cannot be recognized, recheck the connection between the host
connection port and the host bus adapter and the settings.
- -
95