RAID Xanadu User Manual page 116

(7) Host connection port setup
Host connection port setup sets the platform and connection type of a host (business server)
that is connected to a host connection port of the disk array.
Figure 11.1.12 Port Connection Setup
Default values are displayed in the list. To change settings, select the port to edit from the list
and click the [Edit] button. Make changes to each port in the edit screen shown in Figure
11.1.13.
If you click the [Cancel] button, setup through network setup is performed for the disk array
and the initialization wizard cannot be run again. Perform subsequent initialization by
performing Individual Setting from "Configuration Setting". For details, refer to 11.2 "Setup
Modification".
- -
93