RAID Xanadu User Manual page 8

Warnings concerning power
Do not overload an outlet with the power cords of the disk array unit and extended
BBU.
Doing so could cause a fire.
Do not put heavy objects on the power cords of the disk array unit or extended BBU.
If the covering of a power cord is torn, it could cause a fire or electric shock.
Although the disk array unit and extended BBU are compatible with AC 100 V-AC 240
V, the accompanying power cords are as follows according to model number.
Model numbers NF5111-S*/NF5131-S*: For AC 100 V
Model numbers NF5111-N*/NF5131-N*: For AC 200 V
When using the accompanying power cord, use it with AC 100 V (50/60 Hz) or AC
200 V (50/60 Hz), depending on the product model number.
Using it with a different voltage could cause electric shock, smoke, or fire.
Insert the plug of the power cord of the disk array unit or extended BBU in an outlet
securely.
Provide sufficient slack in the power cord so that excessive force is not placed on the
power cord plug or the power cord.
If the power cord is disconnected during operation, it could cause data loss or failure.
To prevent electric shock, connect the power cords of the disk array unit and
extended BBU to outlets that have ground terminals.
Grounding to an object such as a gas pipe is hazardous and must never be done.
Warnings concerning batteries
The batteries of the disk array unit could explode if brought near flames or soaked in
water.
When lithium batteries (button batteries) and nickel metal hydride batteries no longer
operate correctly due to their life spans, do not disassemble, exchange, or charge
them yourself, but contact your sales or maintenance service agent.
WARNING
- vii -