RAID Xanadu User Manual page 123

specification cannot be done unless the AccessControl license key has been input.
- If checked
A logical disk to be bound is assigned to a specified host (business server).
If [Automatic collection] was selected in (5) "Host information collection method
specification", hosts connected to the disk array are shown in the pull-down. Select the
host to which to assign the logical disk.
- If not checked
The logical disk is only bound. However, it is not assigned to a specified host (business
server). Assignment to a host can be performed by setting Access Control in a separate
individual setting. Refer to the "Configuration Setting Tool User's Manual (GUI)" for
details.
[Refresh] button
If the name of the host to assign to the logical disk is not displayed in the Selection
host1/Selection host2 specification, click the [Refresh] button. The following screen is
displayed.
Figure 11.1.18 List Update Screen
Select the method of getting host information.
- Update with info from the Storage Manager server.
Use this to reacquire host information.
- Update with info file.
Use this to perform host specification using the host information file.
The host information file is the file that is output in 9.1 and 9.2. If there is no file,
output a host information file.
Clicking the [OK] button acquires the specified host information.
Clicking [Close] returns to the logical disk binding screen without performing any
processing.
- -
100