RAID Xanadu User Manual page 188

Mask:
Example: SVPNO=00h
00h.IP=192.168.1.1
00h.GateWay=255.255.255.0
00h.Mask=0.0.0.0
SVPNO=01h
00h.IP=192.168.1.2
00h.GateWay=255.255.255.0
00h.Mask=0.0.0.0
(3) Section (License)
This describes a license key to unlock.
Explanation of syntax
Section: [License]
Key: License
Syntax: License=xxxxxx-xxxxxx-xxxxxx-xxxxxx-xxxxxx
When unlocking multiple license keys, describe them on multiple lines.
Example: License=12345-12345-12345-12345-12345;
(4) Section (Disk array)
This is key information for displaying the disk array type being set.
The section name begins with "[*DiskArray]" and is not used in initialization.
(5) Section (Host connection port)
This describes the host connection port settings.
The section name is displayed as "[FCPort]".
(6) Section (Logical disk)
This describes the binding of logical disks.
The section name is displayed as "[LD]".
(7) Section (LD Set)
This describes the binding of an LD Set.
The section name is displayed as "[LDSET]".
(8) Section (Assignment of logical disks to LD Set)
This describes the logical disks assigned to an LD Set.
This section is ignored at re-initialization because it exists as a result of execution.
Describes a subnet mask in the same format as an IP address.
- -
165