Initiating Setup; Tasks And Procedure For New Setup - RAID Xanadu User Manual

2. Initiating Setup

2.1

Tasks and Procedure for New Setup

Execute setup tasks according to the following procedure.
An asterisk (*) before processing indicates that it is executed depending on conditions. Always
execute processing that is not so marked.
Chapter 2 Initiating Setup
Preparation, unpacking, and checking sent items
Chapter 4 Installation
Mounting the disk array unit and disk enclosures on a rack
Installation of disk drives
* Setting AC operating mode
Installing and removing the front panel
* Mounting an extended BBU on a rack
Chapter 5 Cable Connections
* SAS cable connections
Connection to the business server
Connection of LAN cables
* Connection of controller to extended BBU
Connection of power cables
Chapter 6 Turning On/Off Unit Power
Turning on the unit power
Chapter 7/8 Installation of Storage Manager
Installation of Storage Manager
Installation of the volume list command
* Installation of ControlCommand
Chapter 9 Collection of Host Information on Business Server
* Collecting the host information using a file output on a business server
Chapter 10 Installation of the Storage Manager Client
Chapter 11 Initialization of RAID Storage
Initialization using the initialization wizard
Chapter 12 Easy Configuration of RAID Storage
* Batch unlocking of licenses
* LD bind easy configuration
Chapter 13 Connection Confirmation from Business Server
* Chapter 14 Storing Host Information Output to File on Business Server
- -
4