RAID Xanadu User Manual page 142

Quick Format
By performing only the minimum necessary processing and omitting data area
initialization (clearing), this formats in a short time.
This is available only for RAID types and platforms supported by quick
formatting in a basic pool.
* To use a disk on which important data has been placed or another disk that has
already been used, the data can be initialized (cleared) by performing normal
formatting.
RAID Storage provides basic pools and dynamic pools. Refer to the
"Configuration Setting Tool User's Manual (GUI)" for details.
GPT Disk Type
Specify this when using the logical disk to bind in a Windows partition format
GUID partition table (GPT).
Spare Binding
Use this to automatically bind a spare physical disk that has the same PD type as
that selected in [RAID Type/PDP Type (capacity)]. This does not bind a spare
disk if there is no physical disk of the same PD type to bind to a physical disk as
a spare.
[Execute] button
Clicking the [Execute] button performs logical disk binding.
If you create a new LD Set by performing host specification, this binds a 0.2 GB
control volume to the LD Set besides the logical disk that it binds.
Refer to the "Data Replication User's Manual (Function Guide)" and "Snapshot
User's Manual (Function Guide)" regarding the control volume.
[Cancel] button
This terminates the LD Bind Easy Configuration dialog.
In logical disk easy configuration, a logical disk cannot be added to an existing
RAID.
Add it in a separate individual setting.
Refer to the "Configuration Setting Tool User's Manual (GUI)" for details.
- -
119