Preparation - RAID Xanadu User Manual

2.2

Preparation

For this setup task, the following supplies and tools are required. Since preparation is required at
the business server connecting RAID Storage, also perform that in advance.
(1) Prepare the following.
Management server, business server, client, installation CD
LAN cable (shielded)
Use a cross cable to connect the disk array unit to the management server directly.
Use a straight cable to connect the disk array unit to the management server via a hub.
Prepare as many IP addresses to assign to the disk array unit as there are connection ports.
Also prepare the subnet mask and gateway address after confirming them with the network
administrator.
Phillips screwdriver (No. 1)
At least three people (required to move the disk array unit)
At least three disk drives are required at the time of setup. Please purchase additional
disk drives.
(2) Execute the setup tasks below at the business server connecting RAID Storage.
Get host bus adapter WWPN
Install host bus adapter driver
Install RAID Storage PathManager
(If installing RAID Storage PathManager)
Begin preparation
Install host bus adapter
End preparation
Figure 2.2.1 Flow of Preparation
-
5
Business server
-