Monitoring Of Respiratory Parameters - Siare Aria 104 User Manual

2.3.7 Monitoring of respiratory parameters

2-24
•
Based on the lung ventilator parameters set by the User and on the
patient's characteristics, the lung ventilator is able to monitor and
measure a series of values necessary for the patient's clinical
evaluation.
•
At the top of the screen, there is a led indicator that displays the
pressure inside the airways in real time. The measured and monitored
values (right side of the screen) are updated after each breath of the
patient.
E.g. Here below the data in the images below refer to VC/VAC operative
mode.
The light bar indicator (with scale from -0 to 80 cmH
the pressure inside the airways during the respiratory phase, in real
time.
The value displayed is the maximum measured pressure inside the
airways (cmH
2
The displayed value shows the positive pressure at the end of the
expiration: the measurement unit is cmH
The User can control if the lung ventilator is able to reach and keep
the PEEP pressure level set, using this value.
The displayed value shows the real respiratory rate (number of
breaths per time unit) taking into consideration for the calculation
any spontaneous activity.
O).
O), displays
2
O.
2
User manual, DU3104101