Manual Organization - Xerox Phaser 3330 Service Manual

Manual Organization

The Phaser 3330 and WorkCentre 3335/3345 Service Manual contains these sections:
Introductory, Safety, and Regulatory Information
This chapter contains important safety information and regulatory requirements.
Chapter 1 - General Information
This chapter describes the printer's operation, configuration, specifications, and consumables.
Chapter 2 - Troubleshooting
This chapter provides detailed troubleshooting procedures for error messages and codes displayed
on the Control Panel. Troubleshooting covers the operation of Service Diagnostics. In addition, this
section includes troubleshooting methods for situations where an error indicator is not available.
Chapter 3 - Image Quality
This chapter focuses on techniques to correct image quality problems in printer output.
Chapter 4 - Service Parts Disassembly
This chapter contains removal procedures for spare parts listed in the Parts List. A replacement
procedure is included when necessary.
Chapter 5 - Parts List
This chapter contains exploded views of the print engine and optional Field Replaceable Units
(FRUs), as well as part numbers for orderable parts.
Chapter 6 - Maintenance
This chapter provides periodic cleaning procedures for the printer. This section also provides
procedures for the adjustment of print engine components.
Chapter 7 - Wiring
This chapter contains printer plug/jack locations and wiring diagrams.
Xerox Internal Use Only Phaser 3330 and WorkCentre 3335/3345
General Information
1-3
Service Manual