Advertisement
Guidelines and Instrument Layout
Side USB, Analog
There are four features of the right side of the ADR-1500 enclosure; the
locking latches for the hinged door, the sealed USB connection, the sealed
Panel
analog/alarm connect and a sealed cord grip. The locking latches join the
enclosure body to the front door and compress the gasketing for proper
sealing of the enclosure. These latches also permit the use of padlocks, if
necessary. The sealed USB connector is used for PC-based communication
for instrument configuration, data downloads and firmware upgrade using
the factory-supplied pDR Port user interface. The sealed analog/alarm
connector is for tying the ADR-1500 to an external data logger or PLC
using the factory-supplied cable. The cord grip permits the user with access
to the interior instrument for customization (e.g., wireless
communications) and to the optional relay connector. For more
information on options, see Chapter 8,
"Optional
Accessories".
Refer to
Figure 2–7
below for the location of items on the Side USB,
Analog Panel of the ADR-1500.
Equipment Damage Equipment damage may occur if exhaust port is
blocked or port covers are not in place if unused.
▲
Omni-Directional Inlet
Beacon
USB Connector
Analog/Alarm Connector
USB Cover
Sealed Cord Grip
Figure 2–7. ADR-1500 Side USB, Analog Panel
Thermo Fisher Scientific
MIE ADR-1500 Instruction Manual
2-13
Advertisement
Troubleshooting
