Advertisement
Auto-Start (Optional)
Configuration
Thermo Fisher Scientific
LOGGING ENABLED
LOGGING ENABLED
LOGGING ENABLED
In the screens above, by pressing the
logging tag number, the logged averaging period, and the logging site
name.
The desired time and date for the automatic start of a run and data logging
can be selected as described previously. This feature is optional.
From the Operate menu, press the
●
key to the Start@ screen.
START@
In this screen, the user can press
date for the ADR-1500. If this feature is selected, the instrument will
remain in Standby mode until the current time reaches the start time.
In addition to the description of the
chapter, the configuration of the instrument should be reviewed prior to
Review
beginning a run.
In addition to assuring that the data logging features are set, the three most
important configuration settings to review are the:
Inlet Type – Total, Red Cyclone, or Blue Cyclone
●
The Flow Rate and respective D50 cut-point, and
●
The Enabling or Disabling of the RH Correction
●
1:00:00 h:m:s
Factory default
01
14:45:30
13-Nov-08
key, the user can edit the
ENTER
key and scroll the ▲ or ▼
ENTER
to alter a delayed start time and
ENTER
"Configure
Menu" earlier in this
MIE ADR-1500 Instruction Manual
Operation
3-29
Advertisement
Troubleshooting
