Advertisement
Operation
Logging Status Edit
Logging Period Edit
Logging Site Edit
3-12
MIE ADR-1500 Instruction Manual
LOGGING ENABLED
1:00:00 h:m:s
LOGGING ENABLED
Factory default
LOGGING ENABLED
01
The Logging Status Edit screen allows the user to enable or disable data
logging. The asterisk (*) appears to the left of the field being edited.
From the Logging Parameters screen, press the
●
display advances to Logging Period Edit.
Press the
key enable or disable data logging.
ENTER
●
LOGGING STATUS
*
ENABLED
The Logging Period Edit screen allows the user to the logging period. The
asterisk (*) appears to the left of the field being edited. The ▲ and ▼ keys
are used to increment/decrement the time. If either button is held, then the
logging period will change twice per second but the editing focus will
switch to the digit on the left after the button is held for five seconds.
From the Logging Parameters screen, press the
●
display advances to Logging Period Edit.
Press the
key to enable or disable data logging.
ENTER
●
LOGGING PERIOD
*
1:00:00 h:m:s
The Logging Site Edit screen allows the user to select from the list of 50
logging sites. Each site has three associated values: Site Number, a Site
Name, and a Calibration Factor. The Site Name is the only value displayed
key and the
ENTER
key and the
ENTER
Thermo Fisher Scientific
Advertisement
Troubleshooting
